Hi !!! My washing machine euro600 does not make the first cut, the filling one. If I cut the water inlet and then open again for rinsing and more, it continues to work properly. I already changed the electrovalve of the input, clean the filters but the problem remains exactly the same. The pressure switch adjustment screws were not touched at all. This makes the "sound" of the contacts when you should cut the initial fill (the first cut) What should I do? Thank you!

Hi Kuki: just to round off the good answer they gave you, also check that your tub is not clogged where the pressure switch hose arrives (blow it and make sure the air comes out well) and that its clamps and the hose itself is well sealed greetings

You should check the pressure switch, but be careful not to blow it hard if it is electronic because you burn it.

Thank you!!! It was the pressure switch !!!! SOLVED !!!!!