⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Clothes Washers and Dryers

Patrick 06e10 board repair

marcelo_74

hace 6 años

Hi all I have a problem with washing machine Patrick lpk06e10 I would need to know what writing the regulator has is going soldier lying on the plate is 3 legs but the middle one is cut does not go anywhere. And the triac that is with the heatsink the ty501. If you give me a hand thank you very much save me.

Comentar



luis38

95.432

hace 6 años



hace 6 años

Dear, the regulator is 78MO5 and the triac is BTB12 600. Regards

Comentar

marcelo_74

hace 6 años

Thanks Luis, I'm going to change it and I try it



Responder

marcelo_74

hace 6 años

Hello Luis I put the triac and the regulator but when I put it to work in centrifugation it activates the pump but at the second it turns off completely and turns it on again so it keeps doing until I unplug it. turns on



Responder

luis38

95.432

hace 6 años

Dear, from what I interpret, the engine does not work at any point. In these washing machines, this device is usually the source of problems. Regards



Responder

lusangor

56.366

hace 6 años

Hello, comment what reference you have on the board, upload some clear photos.

[img] https://adjuntos.yoreparo.com/imagen_post/0004/12/f4d023251a2d2d2d2d2d2d2d2d2d2d2d2d2d2d5 img]

Comentar

marcelo_74

hace 6 años

There you add the photos is the original 6 kilos



Responder

lusangor

56.366

hace 6 años

there are no pictures



Responder

marcelo_74

hace 6 años

There I sent it lusangor is that of the 6 kilos Patrick and I need the description of the triak that is with the heatsink and on the other side it has a voltage regulator and I also look for its description. Thank you



Responder

marcelo_74

hace 6 años

Comentar

Mariano Catania

hace 6 años

Good morning, the LED 40 degrees and the R102 of what value is it flashing? Since it is also reheated. Thanks in advance.

Comentar

Moto Ac

hace 6 años

good someone would have a picture of the reluctance of this plate .. I need to change two but the writings of their value were burned .. these are near the program selector

Comentar