⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers

washing machine ariston AF533TP front load change bearings

pablo76
pablo76
pablo76
122
hace 6 años
hace 6 años
Hello people. My question is how much should I charge a change of bearings of an ariston AF533TP front load. I clarify that I disassemble it completely due to the dirt it has for having been standing several years (approx 10 years the client told me). So and everything worked and is in very good condition. I hope suggestion. Thank you.
Comentar
alturasbal
alturasbal
alturasbal
27.174
hace 6 años
hace 6 años
Hi, does the support shaft also change it or just the bearings? Without axis it would walk in about $ 1900 and with axis add the price of the same, greetings.
Comentar
pablo76
pablo76
pablo76
122
hace 6 años

Just bearings and retain. The same tomorrow when I clean the pieces well I will control it in case of doubt. Thanks for the reference. Regards.

Responder
claudio_topo
hace 6 años
hace 6 años
Hi Pablo 76. Change the support too, because it must already have its wear and lasts much longer
Comentar
pablo76
pablo76
pablo76
122
hace 6 años

Hi Claudio, the support is cleaned and intact by luck. The problem is that I stay half rule inside the tank lid and I don't have an extractor to take it out. If you know any solution I thank you and if not, we will have to get some because it is stuck ...

Responder
claudio_topo
hace 6 años

Hello Pablo, I take it out with a short long iron on the opposite side, expelling it outwards, after penetrating Ow 40, and if you have a mini lathe you make a slot without reaching the aluminum and it comes out

Responder
pablo76
pablo76
pablo76
122
hace 6 años

I made the groove and then use the round iron cutter and it came out. Thank you. regards

Responder
claudio_topo
hace 6 años

I'm glad luck

Responder
lusangor
lusangor
lusangor
56.366
hace 6 años
hace 6 años
Hi, here in this video, there is a method to get it out. Regards
Comentar
pablo76
pablo76
pablo76
122
hace 6 años

Thank you. I already removed it. Regards.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
COMPRAR
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
COMPRAR
4.64
(11)

Curso Electrónica para Reparación de Placas
Santiago Cediel
$ 29 USD
$ 11 USD
COMPRAR
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis