Gafa genesis 6800 does not send a signal to the engine (it does not tu
HELLO alturasbal6476 I HAD CHANGED THE COALS AND CLEAN THE COLLECTOR .. IS THERE A DIFFERENT DIFFERENCE IN Q PROOF DIRECTLY IN 220 TO THE FUNCTION THAT FULFILLED PLACED IN THE MACHINE ??? APARTMENT OF THE FUNCTION OF THE TACOMETER .. XQ PROBANDOLO IN DIRECT ANDA PERFFECT
When testing directly, it receives all the current, when working with the plate it receives less current so that the washing is done at low rpm, it measures with tester the voltage that reaches the motor card at the time of washing, greetings.
if I knew that in itself I do not send 220 of one I do it in series with a lamp ... or series with water submerging the terminals when they come together they turn faster and when moving away from each other slower
hi juan .. the problem is that i don't have another harness i will try to make one by welding it directly on the platelet i have in good condition ... and i don't have another engine to test ... thanks i'm going to try another cable
Hello, in my opinion it would be the harness and even had problems with continuity and it was that it gave me continuity but when connecting it I was wrong and it was that the connectors did not make good contact, if you have a spray contact cleaner apply it from both sides and try Again, it is the experience that I had in these cases. Regards
¡Aprende a reparar con estos cursos YoReparo!
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
