electrototal2015

90

hace 6 años

ok thanks for the info, that third one will disassemble it and see what it is. Thank you

electrototal2015

90

hace 6 años

Hello Fermin 007, I consult because I am again with the plate, remember that there is a supposed triac that I can not read the info, well I dig the resin a little and I see at least 4 pin for me there are 6 there are 3 well visible and a quarter at one end and I get the impression that two more are connected short behind the main 3. It may be that the TRIAC that controls the discharge pump is 6-pin.

electrototal2015

90

hace 6 años

Well, finally he gave me the info. I COULD MOVE IT, IT SAYS .. STR W 6253 4605K AND IS 6 PIN. THAT WILL BE THE PUMP CONTROL.

Fermin 007

57.307

hace 6 años

Electro
It is an integrated circuit, it is not a triac, a triac is 3-legged, not 6, I do not know the electronic card, so I could not tell you if the pump is controlled by a triac, it would be good if you upload an image of the card in question and the one who knew it told you well, I say for better help, now you should follow the 2 wires of the pump to the card and so you would see the electronic elements that feed it, greetings

electrototal2015

90

hace 6 años

Hello companions, well change the plate, if you are in doubt and unable to find the triac, we bought a new plate that is very costly, and I am marching impeccably so that some element of the plate was the cause of the problem. Thanks to all who tried to guide me.