Hi
It turns out that I am trying to repair the washing machine because it only does the drainage functions, does not spin or start any program. The red light comes out of the key.
I have checked the solenoid valves and they are going well, the drain or anything is not obstructed.
Any ideas that can be?
When you put on any program, it is thrown for a while, it does not take any water and soon it becomes a clack clack and the red light comes out.
Thank you
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers
Hi
It turns out that I am trying to repair the washing machine because it only does the drainage functions, does not spin or start any program. The red light comes out of the key.
I have checked the solenoid valves and they are going well, the drain or anything is not obstructed.
Any ideas that can be?
When you put on any program, it is thrown for a while, it does not take any water and soon it becomes a clack clack and the red light comes out.
Thank you 
Whirlpool washing machine only drains
10
hace 6 años
hace 6 años
Hi
It turns out that I am trying to repair the washing machine because it only does the drainage functions, does not spin or start any program. The red light comes out of the key.
I have checked the solenoid valves and they are going well, the drain or anything is not obstructed.
Any ideas that can be?
When you put on any program, it is thrown for a while, it does not take any water and soon it becomes a clack clack and the red light comes out.
Thank you
23.662
hace 6 años
hace 6 años
Hi, I verify that the water charging solenoid valve works ??? Also check the pressure switch that its connection terminals are not overheated to indicate an internal problem. Regards
10
hace 6 años
Good, the solenoid valve works well. I put direct current and it works, the terminals are fine. The pressure switch doesn't check it, now I look at it. But I think the noises are of that acting. I do not light because it only drains and the other day in the middle of the wash the red light jumped and did not end. Now and don't even get water.
10
hace 6 años
I took it out this afternoon I checked it with the cable and bulb system, it worked fine. After measuring the current, I measured 220v between 1 and 2 and then between 1 and 3 220v.
The washing machine when I reset it, takes water, and ejects it. But do not start washing or spinning.
Anything else that is dark for you? because the trainer doesn't think it's not?
greetings and thanks
23.662
hace 6 años
Hello, a motor with a capacitor that rotates at 1000rpm I don't think it has it, it is more likely that it is a universal motor with coals or brushes, check, in case of the latter, check the length of coals and cleaning where they settle on the carbon residual. Check and comment. Regards
23.662
hace 6 años
Well Friend, I'm glad the team is already working properly. Have a great start to the year. Greetings from Argentina.
293
hace 6 años
hace 6 años
It also enters service mode aver if it throws you some error code
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad