⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers

They will be Next, 7.10 load water while off

Paulino narvaez
hace 6 años
hace 6 años
Hi, I have this washing machine drean Next 7.10 loads the water when it is turned off, the drum is filled and overflowed, by the way, what could be the fault?
alturasbal
alturasbal
27.174
hace 6 años
hace 6 años
Hello, unplug the machine, if it continues to charge water it is because one of the solenoid valves is damaged, if the load is cut when unplugged, it is because the plate is faulty and continuously enables voltage to the solenoid valve, greetings.
Paulino narvaez
hace 6 años

Thanks alturasbal for the advice, being unplugged equal load, where are the solenoid valves, how many are they? And which one could be broken?

Responder
alturasbal
alturasbal
27.174
hace 6 años

The EVs are located under the top cover, part of the body comes out where the water hose is screwed, disconnects the hose, the electrical connectors and turning half a turn out, the whole assembly is replaced, greetings.

Responder
Paulino narvaez
hace 6 años

Tomorrow Tuesday I do it and I tell you what happens, thanks

Responder
Paulino narvaez
hace 6 años

Thanks it was perfect, how do I close the question?

Responder
alturasbal
alturasbal
27.174
hace 6 años

It was already closed by giving as a solution one of the contributions, greetings.

Responder
juan guillermo caceres
hace 6 años
hace 6 años
Friend, if the washing machine loads water disconnected, it means damaged solenoid valves, they are under the top (cover) remove this and you will see both connected to the charging hose, and as you will see that it is a monobody you will have to change both, before disconnecting Take a picture of the connections to avoid an erroneous connection. Check the inlet filter of them, if there is sediment that drags the water, that damages one of them. Regards
Paulino narvaez
hace 6 años

Thank you Juan Guillermo tomorrow I do and I will tell you the result

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis