I already checked the engine out of machine and it works correctly in the speed of washing and spinning ... now it was left with the doubt .. what else can it be?
It may be that the pressure switch is locked as if it had water and therefore does not spin, the programmer may also be damaged, in this case the repair is almost impossible.
Look at the drawing in the answer, this is how the programmer or timer is tested, if you don't turn on the lamps you need to check the wiring.
Good after testing with the lamps and no lights come on ... I tried a pole search and voltage arrives at the terminals but none of the lamps come on
The search pole does not work because with a small tension turns on its light, if you can use a tester.