⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers

Error 30 en lavasecarropas general electric LSGE09E09

Lavasecarropas GENERAL ELECTRIC LSGE09E09M

Lavasecarropas GENERAL ELECTRIC LSGE09E09M

guillermoduarte2016
hace 6 años
hace 6 años
I am repairing this lavasecarropas, First, the problem was that it did not seduce, I checked the filter and it was limbic, I dismantled the drain pump and I found that the pump's pallets were locked by a plastic; clean and re-assemble. Then ... it depletes perfectly, but in the drying process, which lasts for 3 hours, the drain pump evidently failed or did not completely eliminate the water, the result was that it left the clothes wet. I go back to check the pump and it seemed like it made an unusual noise. To make sure, I replaced the pump with a new one. The result was that everything worked perfectly, one and even two complete washes with drying that each lasted 4.58 Hs. Then I let it rest one day, the next day, I'm going to perform another test and when I turn it on, the error E30 appears on the display, I turn it off, I turn it on and again I see the error E30, as I was leaving a spare for another job , I turn it off and go. By rules, an hour later, I turn it on and everything normal, no mistake. I put it to work and everything to regulate; completely wash the clothes and dry the clothes perfectly, in the afternoon of the same day, I reralize another test and also complete and well. The next day and to be sure it was okay before I got it, I'll turn it on again, error E30. The issue is that I am not sure whether to deliver it or not ... since I do not want it to happen in the client's house. Dimensioning: The sewage pump that you place, is not the one that carries the apparatus. The one that carries the device is a pump that has the pallets moved axially in the bottom and also has two cables as if they were a fuse, I think. Thank you, I hope you can guide me.
John People (Juan pueblo)
hace 6 años
hace 6 años
Hi, I transcribe verbatim what says the table of errors of those equipment and that mentions to problems of drainage and pump, possibly the installed pump is not compatible with the equipment, greetings E30 [/size] [color=#c0392b] ■ Without drainage Remove excess foam; The washing machine can not drain excessively soapy water. Unplug the washer and check if the large element filter of the drain pump is clogged. If the drain pump is defective, replace it. [/Color]
guillermoduarte2016
hace 6 años
hace 6 años
Hi, Thanks for the help ... test with the original pump ... but the problem persists ... did a complete wash, I left, and in the afternoon when I turn it on, again the error E30. What I do not understand is because this happens that after perfectly completing the complete wash cycle, it turns off and the error appears when I turn it on at the next opotunidad without touching anything other than the door. Thank you

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis