⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Clothes Washers and Dryers
Mark error 3 brother-in-law ends the cycle
94
hace 6 años
hace 6 años
Hello I wanted to know why my Drean blu washing machine of 8kilos and 1200 revolutions does the normal cycle and when it finishes in order to put an end figure error 3 unlock the door everything well. What can be? As always thank you very much.
23.662
hace 6 años
hace 6 años
Hi, the error is indicating problems in the water heating resistor, located under the spinning pulley of the drum, check its connectors that are not overheated. regards
94
hace 6 años
If I know what resistance is, what I asked was because it marks me when the cycle ends. If in the whole process does not.
23.662
hace 6 años
I can assure you that this process will not last for long, there is a small problem and the board is detecting it, but still with the program until this is aggravated and the error for the whole machine, I passed with some equipment. regards
94
hace 6 años
Already solved the problem Javier had disconnected one of the resistance cables. Thank you very much for the help.
23.662
hace 6 años
Friend, I'm glad I solved it, the strange thing is that I completed the cycle until the end, but well for you and thank you for sharing the problem, have an excellent day. regards
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad