Hi all to the forum I have a problem an aurora washing machine 7 years old: I stopped working electrovalvula control pressure switch capacitor water pump and motor in independent form and it works, directly thought q was directly the problem the programmer changed it and not nothing works the only thing that contacts the blocapuerta is the only thing and does not work anything else change the solenoid valve pressure switch and still the same program and activate the door block and it does not work anything else please I need your help enter normally. From already thank you very much.

Hi, if the washing machine does not load water, it will not do anything, the blocapuerta decides that it works, at that moment it should begin to load water, check if it reaches current to the solenoid valves, otherwise it checks the cables that go from the solenoid valve to the programmer, check that they are not cut or sulfated tabs, since once you load water and the pressure switch cuts at the appropriate level there the pressure switch the engine of the programmer to start washing, review and comment, also note that in these washing machines the electrovalve and the drain pump are connected together, ie if one does not work or is not connected the other does not work either. also if you have the programmer model we can pass the greetings diagram

Hi, if you control the elements separately and they all work, check carefully the wiring, especially solenoid valve and discharge pump, that all have continuity. regards

Dear, from the data it is possible that this washing machine is "related" with some Drean. If you tell us the model we can help you better. regards