⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Kenmore digital electric clothes dryer, brand P5 fault

maiztronava

hace 5 años

THANK YOU, THEY WILL TELL ME. WHAT IS THE PROBLEM, IF THE KENMORE DIGITAL ELECTRIC DRYER, FAILS P5 ............................... .................................................. .................................................. ........................... THE DRYER MODEL IS 796.81382410 ..........

Comentar



tecnimoles f.p.

hace 5 años



hace 5 años

IF YOU INDICATE THE EXACT MODEL OF THE DRYER, I COULD HELP YOU A MORE POCOC BY INVESTIGATING IN GENERAL WHAT I CAN RECOMMEND YOU TO DO IS THE FOLLOWING: Check the power cord connection in the power outlet. The L2 section of the 240 volt power could be absent. Check the house circuit breaker that supplies 240 volt L2 power to the dryer. Reset the switch if necessary. Disconnect the dryer and check the power cable wiring in the terminal block of the dryer. Reconnect the power cable connections and connect the power cable according to the instructions in the installation manual. Replace the power cord if it is damaged. With the dryer still unplugged, check the wiring connections on the main control board and reconnect the loose wires. Replace the control board if it finds damage.

Comentar

maiztronava

hace 5 años

HELLO TECNIMOLES FP, I THANK YOU THAT YOU HELP ME, THE DRYER MODEL IS 796.81382410. I HOPE THAT WITH THIS YOU CAN INVESTIGATE. REGARDS.



Responder

tecnimoles f.p.

hace 5 años

Error code:
Condition: power supply error
Verification / Repair: The power cord on the back of the electric dryer is not connected properly. Unplug the dryer and connect the power cord according to the installation instructions.
IT TELLS ME THAT IT IS THE POWER INPUT CHECK THE POWER CABLE PLUG BRAKERS CABLE AND CZECH THAT IT COMES 220V TO THE EQUIPMENT AND THAT HAS NEUTRAL IS THERE THE FAILURE



Responder