Hi! good day
could you help me to advise me how are the cables of the taimer clock of my dryer easy came a technician of disconnected everything and I no longer return I want to put it myself but I do not know how they go
mod.SEC620DPBB00
I hope to have a quick response possible
IMG_20180130_201436.jpg [454.93kb] IMG_20180130_202211.jpg [763.88kb] IMG_20180130_201415.jpg [531.92kb] IMG_20180130_201451 .jpg [580.38kb] IMG_20180130_201508.jpg [549.39kb] I have an easy one but it's working, I need to upload a photo of the panel to see if it's the same, mine has only the timer button and the one taught.
I can no longer upload the image of the timer is the same just that it has it to the right end and the start to the left, I can not upload the image and it does not give me the option because you gave your problem as solved, I do not know if they allow to give the wath if not for wat, but they don't allow it
Ah that is another problem is not the timer, if it does not light it is because the thermal fuse is open, it has it in the back some are long lined with plastic and another is like a butterfly also lined with plastic, check it should give you continuity, it can also be the heat sensor, or some coil, even the match as you call it
Hello, what a good day, excuse my foolishness, but I already checked all fuse sensors. Only I have noticed that no censors and fuse pass current. I change the black wire that goes in the (b) to the letter (t) and if it gives current wings coil and fuse censors my question is if in the letter (t) no wire goes
