⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Ovens and Cooking

Electrolux 56DTX turns off the oven and is not the thermocouple.

fernetboy
hace 5 años
hace 5 años
I have a 56DTX electrolux cooker, it has two ovens, the lower oven is not on, I tested the thermocouple that is two capillaries and according to a video I found to work correctly, mark 20.5 on the 200k resistance scale, that another problem could have in the kitchen to turn off, thanks.
Comentar
servimat1
servimat1
servimat1
138.835
hace 5 años
hace 5 años
Hi. The magnetic valve may not work or the bolt that pushes the gas passage (from this valve) may not travel sufficiently. To prove it, it would be enough to do it with a common battery. I leave you an image of how it is done. Cheers
Comentar
servimat1
servimat1
servimat1
138.835
hace 5 años

What if, verify that the burner flame efficiently heats the tip of the thermos.

Responder
fernetboy
hace 5 años

Thanks for the input, I had already realized that this was the drama, but I didn't know it could be tested with a stack. I tested it by heating the thermocouple with the magnet connected and it did not stick. At last I changed it from the oven and the one that walked stopped walking and the one that didn't walk started to walk. thanks.

Responder
servimat1
servimat1
servimat1
138.835
hace 5 años

Nice to help you. Cheers

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno
Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
COMPRAR
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
COMPRAR
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno
Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
COMPRAR
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis