⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Ovens and Cooking

Escorial cosina. Crystal Palace model. bottled gas

jonathanvoltaje
hace 6 años
hace 6 años
hello is a problem with the kitchen is when I turn on the stove. and loose the knob goes out it is not locked. as if the safety safety valve does not work so that the burner is ignited. this happens to me with the four burners and the oven
servimat1
servimat1
138.835
hace 6 años
hace 6 años
Hi. It started in a flash, cook it for cooker? Regards
jonathanvoltaje
hace 6 años

If it started from apoco. first with the oven and now with all the burners. I have to lock them so they don't go out

Responder
servimat1
servimat1
138.835
hace 6 años

The thermoses have stopped working. You have to replace them to make them work again.

Responder
jonathanvoltaje
hace 6 años

What are the thermos?

Responder
servimat1
servimat1
138.835
hace 6 años

Upload a photo of the kitchen without the lid in the area of the gas keys or robleros.

Responder
Walter dal farra
hace 6 años
hace 6 años
Hi Jonathan: refers to the thermo cuplas, in that model I do not remember if you do not use them to hook up, if so try to disconnect them and reconnect them since they usually sulfate and do not make contact. LUCK
jonathanvoltaje
hace 6 años

I do not understand much but disassemble the kitchen and I have a doubt it may be that there is a thermocouple x each burner ?. The ones I saw are under pressure

Responder
Walter dal farra
hace 6 años

if it is one for each burner, take them out to see that they are not sulfated and if so they do not change them.
LUCK

Responder
jonathanvoltaje
hace 6 años

If Walter dal farra. That was the problem thank you very much for your help

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis