⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Microwave oven

magnetron.marca replacement; Galanz model m24fa-410

gregorio montero

hace 5 años

Greetings friends, the question I have is, if I can replace the magnetron model: m24fa-410a of my microwave which is damaged by another m24fa-210a new I have? Can you work me well without any problem?

Comentar



oswaldo lizarraga

6.567

hace 5 años



hace 5 años

Hello, if the size and shape is the same in both sure that it does, it happens that some bring thicker magnets and more fins for heat and power dissipation. Place it without fear and secure it, if there is any doubt you comment.

Comentar

gregorio montero

hace 5 años

Ok, structurally they are the same, I will place it, the other question is, can I place the condenser any good? they go from 0.65mf to 1.2 mf can you work well for me?



Responder

oswaldo lizarraga

6.567

hace 5 años

Hello, it is a range that goes from 0.65 to 1.2 uf your stock, you can keep the capacitor that you currently have or that brought the microwave, if it is good, but replace it with one of the same value, to avoid inconvenience since as you see these capacitors They are precision, now you have the value of the capacitor that brought the microwave?



Responder

Fermin 007

57.307

hace 5 años

Gregorio Well, according to the numbers you passed, that is, the model is exactly the same, I do not see any problem, it should work OK, there would be if the aluminum fins were down or in another position or the magnetron connectors, but I I think they are exactly the same, place it must work, I have placed a lot and even now I have not had any problems, greetings

Comentar

gregorio montero

hace 5 años

Ok, structurally they are the same, I will place it, the other question is, can I place the condenser any good? they go from 0.65mf to 1.2 mf can you work well for me?



Responder

Fermin 007

57.307

hace 5 años

Gregorio
NO, the capacitor must carry the corresponding one, which does not have a capacitor? must have and if it's good that leave, greetings



Responder

franklin j rodriguez

24.432

hace 5 años

friend the fall of them are not the same but it adapts bone can be placed look for the way to hold it and will work the same since I adapted them and it works very well, of course that is in case of not getting the original

Comentar

gregorio montero

hace 5 años

Ok, structurally they are the same, I will place it, the other question is, can I place the condenser any good? they go from 0.65mf to 1.2 mf can you work well for me?



Responder

franklin j rodriguez

24.432

hace 5 años

if it has a lot of difference you can't give me the original mf and the one you are going to place, and because you are going to replace the capacitor



Responder