20191214_162616.jpg [1.94MB] Hello, I have a microwave Candy CMG 25D CW and the wheel does not work well to put the time or weight, it is very difficult to select the time, when turning it does nothing and you have to be giving it several times for one side and the other until hopefully it responds and costs a lot. Anyone know how to fix it?
Cheers
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Microwave oven
20191214_162616.jpg [1.94MB] Hello, I have a microwave Candy CMG 25D CW and the wheel does not work well to put the time or weight, it is very difficult to select the time, when turning it does nothing and you have to be giving it several times for one side and the other until hopefully it responds and costs a lot. Anyone know how to fix it?
Cheers
20191215_231012.jpg [1019.27kb]
Hello, thank you very much to both of you for answering, I tell you, I took out the knob and it is ok, it is not swept, the problem must be internal to the piece that I indicated with the screwdriver, they know what it is called and if it can be repaired or changed? . The problem is that turning the knob does not respond and if you are lucky after a while turning it shows some value on the screen. Fermin, you tell me something about the potentiometer, is this piece ?. Greetings and thank you very much for helping me.
Microwave Candy CMG 25D CW does not work the time-weight wheel
2
hace 5 años
hace 5 años
20191214_162616.jpg [1.94MB] Hello, I have a microwave Candy CMG 25D CW and the wheel does not work well to put the time or weight, it is very difficult to select the time, when turning it does nothing and you have to be giving it several times for one side and the other until hopefully it responds and costs a lot. Anyone know how to fix it?
Cheers
57.307
hace 5 años
hace 5 años
If the selector is potentiometer type, this must be desoldered and then uncapped to clean the tracks with isopropyl alcohol, greetings
2
hace 5 años
hace 5 años
20191215_231012.jpg [1019.27kb]
Hello, thank you very much to both of you for answering, I tell you, I took out the knob and it is ok, it is not swept, the problem must be internal to the piece that I indicated with the screwdriver, they know what it is called and if it can be repaired or changed? . The problem is that turning the knob does not respond and if you are lucky after a while turning it shows some value on the screen. Fermin, you tell me something about the potentiometer, is this piece ?. Greetings and thank you very much for helping me.
57.307
hace 5 años
Oh sorry I saw the image, if it is a potentiometer, you have to desolder it and then open it to clean the internal lamellae inside, use isopropyl alcohol, eye, if you do not know how to desolder or do not have notions of electronics I recommend that you take it to an electronic technician, he will know how to clean that potentiometer or selector, greetings
57.307
hace 5 años
Now as I was seeing the image getting closer, I think there is no need to desolder it, it has 4 grapitas to hold the potentiometer lid, I believe according to what I saw, those four lamellae can be straightened to remove the potentiometer lid and they would already look the lamellae, if you see that it does not come out, do not try to remove the lid because you can damage it and you better take it as I advise you with a technician of those who repair TV, please comment, thanks and greetings
57.307
hace 5 años
There is another option, in the electronic stores they sell a dielectric splay to clean that type of potentiometers, but the cleaning lasts a short time, there is no way to uncover them and clean them manually, also that there is no way to introduce the cleaner, it would be for the average rod cane, but little splay would come in, that splay is not very expensive, I leave it to your discretion, luck and we are in touch, I am leaving, see you soon.
2
hace 5 años
Thank you very much Fermin, I do not have much idea of electronics but I am going to encourage you to get a hand when I get the isopropyl alcohol, I approve that I already have it disassembled and anyway it does not work well, then I tell you how the matter ends. Do you have any advice on how to open it? Regards.
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
Curso Tecnología Inverter - Fabricación de probadores y herramientas
Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad