⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Microwave oven

My microwave does not spin

Angel Ibarra
hace 5 años
hace 5 años
I have been using it for 1 year and I turned it on again but the plate does not turn and when I open the door there is a sound like tack tack until I close it and let it sound
hector técnico 2023
hace 5 años

Also comment if the microwave turns on interior light and fan when you put it to work!

Responder
Angel Ibarra
hace 5 años

If you turn on light and fan

Responder
hector técnico 2023
hace 5 años
hace 5 años
Hello friend greetings do what the friend says and the plate can be the motor or the voltage take it out and put in the terminals of the same a multimeter in alternating current scale put the microwave to work and see what voltage you have 21 '110 or 220 Either the voltage that goes out on the engine label if the voltage is correct replace the motor with one of the same characteristics as the original greetings. Atte Hector from Venezuela
Zenner
Zenner
5
hace 5 años
hace 5 años
check the door swich friend ... rate
Angel Ibarra
hace 5 años

And don't turn the plate? Would you give me some advice, m

Responder
PETE 17
PETE 17
272
hace 5 años
hace 5 años
hello friend for what I see your microwave works but the dish does not rotate and the sound you can identify the origin when you open the door it may be that the motor gear has been cleared and that is why your plate does not rotate when you open the door is not working the motor of the plate I imagine that the trak you say is a few seconds and already closing the door if you turn on the microphone will start the sound again; you would have to check the plate motor.
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis