jgdiablo2

3

hace 5 años

OK, will the swichs that are the switches that act when closing and opening the door co-approve? How did they get upset? Thank you.

tecnico54

22.006

hace 5 años

first measure if voltage reaches the transformer primary

jgdiablo2

3

hace 5 años

The primary check that I do with the microwave in operation or only connected to the Network?

jgdiablo2

3

hace 5 años

I have checked the primary of the transformer and there is no voltage.

tecnico54

22.006

hace 5 años

Is the microwave working while you have the voltage measurement? '' If so, then you have to check the largest relay is the one that feeds the transformer

jgdiablo2

3

hace 5 años

Hi, is this the relay you mean?
https://ibb.co/giSRnH

tecnico54

22.006

hace 5 años

exactly that is the relay check it out

jgdiablo2

3

hace 5 años

That relay that is normally open and closes when you put the microwave into operation?

tecnico54

22.006

hace 5 años

no, that relay feeds the transformer, fix how many volts the relay says

jgdiablo2

3

hace 5 años

The relay is 250V, the coil reaches 220V and when the microwave is in operation the relay output contact gives 220V alternately.

tecnico54

22.006

hace 5 años

cam, bia ekl relay

jgdiablo2

3

hace 5 años

https://ibb.co/mSJxgc

jgdiablo2

3

hace 5 años

Hello, I have asked for the relay to the ST it will take me a few days, can I do some test connecting the relay connection with the output contact to check if it heats the microwave?

tecnico54

22.006

hace 5 años

so the following disconnects the wires from the primary of the transformer then looks for a test cable and directly feeds the transformer so you will know if it heats up

jgdiablo2

3

hace 5 años

You mean that 220v power directly to the transformer by removing the wires that it has connected?

tecnico54

22.006

hace 5 años

Exactly friend with 220 that is the tension that comes to the transformer because 4 I tell you to feed it with 220 direct so you will know if it heats up

jgdiablo2

3

hace 5 años

Hi checked by giving direct voltage to the transformer and the microwave heats up correctly, I just need to have the new relay and try again, thanks.

tecnico54

22.006

hace 5 años

good friend just wait for the relay to come and comment what happened

jgdiablo2

3

hace 5 años

Hello partner, first of all thank you for your help and tell you that I have installed the new relay this afternoon and started the microwave being its operation completely correct heating the food perfectly.
a cordial greeting.

tecnico54

22.006

hace 5 años

you're welcome friend, you can close the question by choosing the best solution