⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Microwave oven

microwave whirlpool model jq278bl works 1 minute and turns off

Microondas Whirlpool JQ278

Microondas Whirlpool JQ278

nestor villafañe
hace 5 años
hace 5 años
Hello friends of the forum I enter this. that putting it into operation is fine perfect but the minute the plate goes out as if the process was over. and over there it works only 30 seconds. what will it be? thanks atte. Nestor
tecnico54
tecnico54
22.006
hace 5 años

2 question is digital ??? does it turn off completely or just stop ???

Responder
nestor villafañe
hace 5 años

Hi friend, it's digital. it is good that the timer is turned off and the time remains. .
axis: I put 5 minutes and it is good 4..2, 4.1, and in 4.00 it jumps to the clock and the cooking stops

Responder
nestor villafañe
hace 5 años

probe disconnecting the entrance of the traffic so that the magnetron does not have to work and I do the same thermostats are all normal cold.
I do not know what could be .

Responder
tecnico54
tecnico54
22.006
hace 5 años

THE PROBLEM IS ON THE PLATE THE MOST LIKELY THAN THE MICROCONTROLLER

Responder
nestor villafañe
hace 5 años

OK thank you very much . I deliver it to the client. I don't feel like denying. I value you as a solution

Responder
hector técnico 2023
hace 5 años

hello friend greetings do not close the subject you have not yet reviewed surrounding components is not always the microcontroller

Responder
hector técnico 2023
hace 5 años
hace 5 años
Hello friend, you should check the surrounding components as transistors in leakage, open resistance diodes and filters, the technician or lover, you must check not to surrender the electronics quickly, in a lot of pacienia, friend review what I said and comment greetings remember patience is a virtue . Atte Hector of Venezuela
tecnico54
tecnico54
22.006
hace 5 años
hace 5 años
it is a complicated failure to repair
nestor villafañe
hace 5 años
hace 5 años
Hi friends, thank you very much for the time. the client came to look for it and deliver it as it was I didn't find the fault thanks
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis