⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Microwave oven

Electrolux microwave emmha253d2pw

Julio_k915
hace 6 años
hace 6 años
Control board after choosing the meals when pressing start button does not respond, it is not the start button since with the clock function it works, with none of the meals functions it responds only works with the clock function
hector técnico 2023
hace 6 años
hace 6 años
Hello friend greetings if you say that it is not the good button then the touch membrane is good that it is usually the fault that you clique the cause the good membrane check the welding control board and everything if everything is fine could be a microcontroller problem comment. Atte Hector from Venezuela
Julio_k915
hace 6 años

Hi Héctor, if I believe that some memory is not working since when entering the different options and pressing start, nothing happens, checking I also discovered that the fuse was burned, I changed it but it remains the same except that I could set the clock that did not I could, that you think of putting a universal plate, I have fixed some microwaves but never one with control board problems, the original plate I don't get it. Well I'll check how you say and I'll tell you. Thank you Julio from Buenos Aires - Argentina

Responder
hector técnico 2023
hace 6 años

Ok friend but do not discard the membrane I in your place to get out of doubt disconnected the membrane from the connector of the plate and with a little cable I am making contact bridges in the bone plate as if you were adapting push buttons so you give letters the membrane that good or bad and then you make the decision to heat a universal plate.

Responder
Julio_k915
hace 6 años

Dear Héctor: With the plate on the table I enter a food option for example MEAT the diplay shows A-3 (for example), with the cable I look for all the combinations for start and nothing but, then pressing the delete button and pressing the start button once, I am warned that they enter 30 seconds, pressing 2 times adds 30 seconds more | that is, each press adds 30 seconds. I tell the client and he tells me it's okay, leave it to me, so with that I get ready and a good end to the story. I want to thank you for everything and I send you a big hug.
July

Responder
hector técnico 2023
hace 6 años

Hello friend ok I understand if the client is completely fine, the client is always right hahaha a hug until another opportunity greetings.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis