⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Microwave oven
Problem when heating is a panavox
hace 6 años
hace 6 años
Good night ... I have a problem with a microwave that when I disassembled it had the high voltage fuse blown, but when I put a new fuse it does not heat me up what the microwave failure can be. From already thank you very much
57.307
hace 6 años
hace 6 años
it could be the discharge diode, the magnetron or the capacitor, eye, first discharge the capacitor and then check the diode and then the magnetron and the capacitor, greetings
hace 6 años
I changed the capacitor along with the high diode, now the fault that makes me is to burn the input fuse
57.307
hace 6 años
Jose and you would not be wrong to place the Diode? Check that very well, because if you place it wrong in the terminal of the capacitor that does not apply, it may be that why the input fuse is thundering, but if you checked the door swichs or not?
hace 6 años
Good morning ... I was checking the things you told me and they are all good. I opted to change the "new" capacitor (because they sold it to me) and it turns out that was what made me burn the input fuse. And what was also wrong was the magnetron who jumped out. Thank you. Hug
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad