⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Microwave oven

Golstar microwave oven

virgilio rivero
hace 6 años
hace 6 años
Good night, the problem is the following one. In case the microwave shows, it presents a problem in the membrane, the client says he has no money to send it fixed, asking me to do what I can to put it to work, the question is the following when placing it In general function key it starts me up. on keys of 6.10min, 3min, 2.30min. etc. It complies with the oven cycle. When the door is opened, it goes out, having to reset it, ie unplug it to put another process. Another thing I noticed was that for example I put 5 minutes for example at minute 2. Suppose I interrupt the work by opening the door. This goes out but with the difference that when closing the door again it is still off the screen. but in this occasion the oven is still working my question is, will this have to do with a short on the card, will have to do with problem in the suich, although I already checked them, by the way I changed the two relays that presented difficulty, who can guide me in this fault I would very much appreciate it
Fermin 007
Fermin 007
57.307
hace 6 años
hace 6 años
because it could be false contacts in the welds, especially in the card transformer, check all the welds with a magnifying glass, greetings
virgilio rivero
hace 6 años

good afternoon fermin, greetings i just read your mjes. I did that in due opportunity. Now the fault was in the door suich I make the observation that in this oven, the first time it happens I turn on the screen only if and only if the door is closed or at least this was happening to me, since normally or at least minus the oven that I have seen so far one plugged in and ready the screen came out. here until it closed it didn't turn on. Although the membrane does not work in its entirety I suppose that these furnaces work so because so far it is working well I give thanks for

Responder
Fermin 007
Fermin 007
57.307
hace 6 años

Hello virginio, because I have never really encountered that system that you comment, which turns on the display only when closing the door, by means of a door swich, well every day you learn something, thanks for sharing the solution, greetings and Congratulations.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis