Microwave oven Hiaense brand model h30mosd1g does not turn on card
Hello, check that the transformer is giving the voltage in the secondary, to power the card.
How are you, thanks for taking time to help me.
It does not bring a transformer it brings a switched source at an output of 7.59 v and in the next 12.21 which suggests that the voltage is fine
Well then you have to have the voltage of 5 or 3.3V that feed the mic, is that voltage?
If it is ok, if the microphone is powered and you have nothing on the display, or the microphone is not oscillating or is damaged, it would have to be fixed if you have glass to change it to see what happens.
As I told you if the microphone receives the voltage of 5V and nothing works, it is likely that the microphone is damaged.
This is Carlos quiro and I am seeing seeing him another card since the mic did not get it just that that card in specific did not get it either I will try to adapt a
Yes, the total functions will be similar since several microwaves are very similar, always talking about the same capacity.
That's right I have several here that I think they can serve me let's see a can be done and check in the refactionary but nothing
Hi.
But if you turn on the light, the fan turns on, and I suppose it should heat up even if you don't mention it, the mic has to be working. In that case it may be a failure in the display or other peripheral.
Also check the electrolytic capacitors.
Regards.
I already went crazy this oven brings a resistance inside it is the first one I see like that with steel inside and all that you comment on the light the fan and the turntable rotate although without the card, the card I am testing it out of the oven precisely I removed it to check faults in the switches but they do not present faults I don't know what to do but what if the card should turn on outside but does nothing.
But the card has to be connected, by the switches if not it will not be activated unless you make a bridge in the corresponding place.
It has a switch that is the one that feels the door open and closed the other two interconnect each other to make the fan feeder and the rest
This is how the switch has the test card installed but nothing even lights up a life signal
That's right, check the entire card and if it is the mic. But now the problem is that no card matches, this panel does not bring numbers only selectors I will have to look for the original card
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
