⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Microwave oven

problem with a microwave circuit

jancarlos perdomo
hace 6 años
hace 6 años
good morning friends, I have a problem with a microwave, my fuse is burning when I select the minutes to act that hot
tecnico54
tecnico54
22.006
hace 6 años

When you start it, does the fuse burn?

Responder
jancarlos perdomo
hace 6 años

Yes friend, the fuse burns

Responder
Ennio Montenegro.
hace 6 años
hace 6 años
Door switches generally stop operation with the door open and allow it with the door closed. With the oven disconnected from the mains, disconnect the high voltage cable from the high voltage transformer. When testing, the fuse must not be burned if the fault is in the capacitor; high or magnetron diode. What generally fails If the fuse blows, you should check the high voltage transformer.
jancarlos perdomo
hace 6 años

I already did everything you are informing me about the dula I have is with the capacitor and the xq diodes do not give me readings with the multimeter and the capacitor I tested it with a lamp and continuous lamp meda

Responder
Ennio Montenegro.
hace 6 años

With all the intensity or medium intensity ..

Responder
tecnico54
tecnico54
22.006
hace 6 años
hace 6 años
check the door swichs as a first measure
jancarlos perdomo
hace 6 años

If I already did it and everyone is in perfect condition, the normal ignition at the beginning and when I put the minutes and press start to burn the fuse

Responder
tecnico54
tecnico54
22.006
hace 6 años

nothing works burns immediately

Responder
jancarlos perdomo
hace 6 años

He is running the whole normal card until now, he lets me restore the time, but when he selects to warm up and I press start, the fuse burns

Responder
tecnico54
tecnico54
22.006
hace 6 años

disconnect the primary wires from the transformer and test if it continues to burn

Responder
JoseOrtiz
JoseOrtiz
1.274
hace 6 años
hace 6 años
Your fault may be in the high capacitor, measure if your terminals are not short
sequete
hace 6 años
hace 6 años
I think the fault is in the capacitor or the high diode. You can try them with a multimeter.
Luis Alexi García Paz
hace 6 años
hace 6 años
Download and then Measure the capacitor, if it gives you continuity between its terminals, change it to a similar one.
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis