⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Microwave oven
Voltage in philco microwave transformer
hace 6 años
hace 6 años
Good! I have a philco microwave that measures the alternating voltage that enters the transformer. It marks me 16 volts at most. My question is the following, it is possible that from the board it only blows 16 volts to the transformer or they have to go 220 volts. Currently I have the microwave that does not heat with the magnetron or the grill. Already check the relays, replace the fuses, the high diode, test the capacitor, the door switches are running. Until changing the controller board and still not heating. thanks for your help
hace 6 años
That may be failing, if the plate is another. And does the same fault? The plate motor works, the lamp works, the high voltage part is disconnected for safety. But they don't get 220v to the traffic
hace 6 años
It was all well checked. But it is a microwave that has already been groped, the fault I had was that the relay cables were poorly connected and that is why I did not send the 220 to the traffic. And not having the connection diagram complicated a bit. I am already working. Thank you everyone for the help
¡Aprende a reparar con estos cursos YoReparo!
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
Curso Tecnología Inverter - Fabricación de probadores y herramientas
Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad