⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Microwave oven

microwave ovens brand reflz

leonardo lealtecnico
hace 6 años
hace 6 años
good afternoon friends of the forum ........ I tell you this fault the oven yego with the fault that had sizzle in the antenna of the magnetron good change it put 2 ton (paste) in the cavity where the antenna goes ......... well I mount the magnetron and aora starts and goes off alone. I changed the magnetron and the fault still starts and goes off ... it probe without the magnetron and works perfect does not turn off ... can help me out of this ªª !! Fail !!
hector técnico 2023
hace 6 años

hello colleague greetings, let's see the aerial goes appreciation as the colleague comments okay okay my question is when you say that it turns off that you mean the displey goes off? or is it just for the meter? comment to help you

Responder
leonardo lealtecnico
hace 6 años

greetings colleague hector not the paste was placed in the cavity of the oven where the antenna is inserted .... ok friend hector turns off the display goes off everything

Responder
leonardo lealtecnico
hace 6 años

hector is proven with 2 magnetrons and nothing equal ignites and when it is heard that the magnetron starts it turns off all display

Responder
hector técnico 2023
hace 6 años

but it does not make much sense since you remark that as soon as the magnetron is turned on the permitter is triggered these permisores are designed so that when the magnetron passes the working temperature this acted and it turns off the microwave in that short time it is impossible that exceeds that temperature or me Am I wrong, colleague, Leonard?

Responder
leonardo lealtecnico
hace 6 años

if friend hector turns it on but when it is heard that energizes the magnetron goes off

Responder
hector técnico 2023
hace 6 años

where you put the paste on the outside or inside the hole where the antenna? and because you put this catch had a hole?

Responder
leonardo lealtecnico
hace 6 años

yes and thank you for responding if there was hay as eaten by the rust and bow to the magnetron if inside the hole where the antenna

Responder
hector técnico 2023
hace 6 años

Ok, look, you must paint that paste to cover it since this is going to make arcs, now my question is how is the capacitor and the diode are correct? I already tried with others?

Responder
leonardo lealtecnico
hace 6 años

thanks for replying hector the truth is not tested with another capacitor nor tested with another diode i will have to test test one question i test with another capacitor even though it measures well !!

Responder
leonardo lealtecnico
hace 6 años

I explain better the capacitor is in good condition but the truth is not tested with another capacitor I will do the test and I will keep you informed

Responder
hector técnico 2023
hace 6 años

if you remember that these components can measure well but in a matter of work fail test with another trainer to leave doubts porq of true this fault this racimara friend and you tell me the second magnetron that you placed this is sure this good?

Responder
leonardo lealtecnico
hace 6 años

I'll keep you informed, brother! a hug!

Responder
hector técnico 2023
hace 6 años

Ok perfect regards

Responder
leonardo lealtecnico
hace 6 años

that such good afternoon friend hector change diode hv capacitor thermistor and brother nothing goes off only if I take off the transformer wires work normal

Responder
tecnico54
tecnico54
22.006
hace 6 años

BUT THE MAGNETRON DOES NOT CHANGE IT

Responder
hector técnico 2023
hace 6 años

change the magnetron for another one, I know that you say you already put another one but it can also be bad, put a third and comments

Responder
leonardo lealtecnico
hace 6 años

the truth friend hector I have tried magnetrons of other furnaces that are working and the fault perciste

Responder
hector técnico 2023
hace 6 años

Good friend test with another transformer of high tencion test with another of any microwaves and comments

Responder
leonardo lealtecnico
hace 6 años

that such friends happy night ....... friend follow the problem of the oven and you change the transformer the capacitor the diode hv you e proven several magnetron and bnada really do not know what to do

Responder
tecnico54
tecnico54
22.006
hace 6 años

Yes, the situation is rare, my friend.

Responder
leonardo lealtecnico
hace 6 años

friend thanks for responding if it is quite rare the only way it works is to disconnect the wires from the magnetron

Responder
tecnico54
tecnico54
22.006
hace 6 años

it would have to control which voltage it gives the plate to the primary of the transformer

Responder
hector técnico 2023
hace 6 años

friend lolita de verda that rare this fault colleague let me analyze well to see that I advise

Responder
hector técnico 2023
hace 6 años

friend analyzing everything commented.and all he did for me is the stick that you put him that is doing that the microwaves are not directing well that makes it shoot sounds a little crazy.but that's what I think is happening friend

Responder
leonardo lealtecnico
hace 6 años

hector a greetings I have good news and solve the fault was effectively the stick that had placed in the cavity of the microwave oven good I have to thank you friend and also the technician 2015 for your valuable help a hug

Responder
tecnico54
tecnico54
22.006
hace 6 años

good friend that you solved tui p'roblema

Responder
leonardo lealtecnico
hace 6 años

many thanks to the friend hector and solve the fault .... how do I solve it

Responder
tecnico54
tecnico54
22.006
hace 6 años

click where it says accept green solution

Responder
hector técnico 2023
hace 6 años

hello, colleague, greetings, look, just look at it, I said that it was the wrong thing to do. You did not give me the solution. I told you where the problem was, my friend. I could not answer the moment because I had trouble getting to the page and I'm back. Well the important thing was that I solve it but next time do not give the quick solution, wait for one to respond so that you give the solution to who actually gave you greetings friend until another opportunity.

Responder
leonardo lealtecnico
hace 6 años

Friend really hector thousand apologies really brother will not happen again

Responder
tecnico54
tecnico54
22.006
hace 6 años
hace 6 años
the antenna is not stuck just going to pressure
tecnico54
tecnico54
22.006
hace 6 años

is turned off because the magnetron thermostat acts because it is too hot

Responder
tecnico54
tecnico54
22.006
hace 6 años

TO THE MAGNETRON YOU PLACE THE M ISMO THERMOSTAT

Responder
leonardo lealtecnico
hace 6 años

hello tech friend 2015 if it actually turns on normal but when you hear that the magnetron is turned onc the display turns off and thanks for replying technical friend 2015

Responder
tecnico54
tecnico54
22.006
hace 6 años

THE REVERSED TYERMOSTAT THAT TYRAE THE MAGNETRON ???

Responder
leonardo lealtecnico
hace 6 años

thank you for answering technical friend 2015 if you measure well

Responder
tecnico54
tecnico54
22.006
hace 6 años

I REFLECT Q1UE CAN BE THE THERMOSTAT THE DAMAGED AND CUT ONLY START THE MAGNETRON

Responder
leonardo lealtecnico
hace 6 años

ok tech friend tomorrow I changed the thermostat and I will keep you informed and thanks for your valuable collaboration

Responder
tecnico54
tecnico54
22.006
hace 6 años

as a test removes the thermostat from the magnetron and test if it continues to do the same

Responder
leonardo lealtecnico
hace 6 años

Thank you, my technical friend, I will do it and I will keep you informed thanks

Responder
leonardo lealtecnico
hace 6 años

Greetings friend I have tried 3 of other microwaves and the truth with no results

Responder
tecnico54
tecnico54
22.006
hace 6 años

CHANGE THE THERMOSTAT

Responder
leonardo lealtecnico
hace 6 años

Yes friend

Responder
tecnico54
tecnico54
22.006
hace 6 años

I WOULD HAVE TO MAKE A REVISION TO THE TRANSFORMER THANK YOU FOR THIS ONE THE FAILURE TO MEASURE THEIR COILS IN CONTINUITY AND SEE THAT MEASURES GIVE

Responder
tecnico54
tecnico54
22.006
hace 6 años

it would have to check the transformer to measure its coils the secondary primary and the wires that go towards the magnetro and see what measures give that test

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis