[img] https://adjuntos.yoreparo.com/imagen_post/0004/94/79d2a1c2a3b3a3db3db2d2 img]
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Irons
Atma steam iron pv1251E does not heat
35
hace 5 años
hace 5 años
Good day. My Atma PV1251E iron does not heat. The resistance appears to be in good condition. The only odd thing is a little chap that is separated from another and when making contact between the 2 the iron starts to heat. My question is whether there are any components between these 2 chapters or is it only connected with welding?
[img] https://adjuntos.yoreparo.com/imagen_post/0004/94/79d2a1c2a3b3a3db3db2d2 img]
[img] https://adjuntos.yoreparo.com/imagen_post/0004/94/79d2a1c2a3b3a3db3db2d2 img]
10.397
hace 5 años
hace 5 años
friend the desoldadas chapitas of the photo is a protection of the iron for overheating when it gets too hot due to thermostat failure (automatic) the internal temperature causes that contact to melt when the tin melts this causes the voltage step to be interrupted to Do not melt the iron, clean the contacts of the automatic (sometimes they stick together) and re-solder with that tin you will have to push the contact a bit since it is steel to weld again, greetings
hace 5 años
hace 5 años
friend first verify that the resistance of the iron is working with a multimeter in the continuity scale touches the 2 points of the resistance and see if it works what you show us is the potentiometer or the temperature regulator but to remove the doubts verify that and tell me so we continue
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad