⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Hair straighteners

Hair iron did not ignite by thermal fuse

Katanese
hace 5 años
hace 5 años
Good morning greetings friend Fermin 007 the resistance you must measure so that it works well and the thermostat what is in this model of hair straightener I have not seen it sorry thank you could you please indicate me it is a PROFESSIONALE RUCE iron, to something else I put direct bone without the thermo-fuse works but not let it reach the temperature so that it goes off excuse me if you can help me in this I will thank you thank you.
Fermin 007
Fermin 007
57.307
hace 5 años
hace 5 años
I leave this video, it is similar to your iron, the temperature control is the NTC thermistor, I do not think this bad: https://www.youtube.com/watch?v=AhZyOQYZGOY put ceramic to the thermo fuse, as in the video
Katanese
hace 5 años

very well I will do that and I write if or not I solve ok thanks

Responder
Katanese
hace 5 años

good day Fermin 007 if I did the video that sent me and it turned out I also had a false contact on the NTC thermistor board cable solder it again and well solved thanks for the support blessings

Responder
Fermin 007
Fermin 007
57.307
hace 5 años

Katanese, how good I already have, greetings and blessings also for you.

Responder
Katanese
hace 5 años

Thank you I will contact you for the next one to continue to help ok

Responder
Fermin 007
Fermin 007
57.307
hace 5 años

Here we go for what is offered, greetings and blessings.

Responder
Katanese
hace 5 años

Well I also say thank you

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis