⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Fans

Electric diagram (abon garden)

caramelino90

hace 6 años

Hi everyone, I have a ceiling fan (abon garden) and I need to know how the motor cables are connected since they are all loose. The cables leaving the engine are 4 and are gray, white, red and brown. Someone knows the electrical diagram or how these cables are connected with respect to the phase, the neutral and the capacitor? .... From already thank you very much...

Comentar

nastor

17.232

hace 6 años

Hello You only have to identify the coils and reconnect everything again, for this you must test resistance and locate the starting coils (more resistance) and the coils (less resistance). If you have an inverter, the coil ends are reversed to change direction of rotation, Use this diagram to guide you, number cables and measure resistance, with all identified only connect the capacitor.

*** old post link

Comentar



armandocr

6.132

hace 6 años



hace 6 años

The 4 cables correspond to the 2 coils. Starting and Working. You must measure resistance between the 4 cables, note and then group them, 2 of greater resistance (Starter Coil), 2 of lower resistance (Working Coil) and 2 that corresponds to the sum of the resistances of both coils. according to the following diagram.

Armando

Comentar

caramelino90

hace 6 años

Hello dear thanks for the time and the good vibes, excellent the diagram is understood perfect. The doubt I have is that once you see each coil any of the two cables can be face or neutral?



Responder

armandocr

6.132

hace 6 años

Once the cables are identified, connect 1 of each of the coils and that is the common cable connected to the Neutral of the plug. From the union of the other cable of the Working coil with the capacitor the connection to the speed regulator leaves and from there to Phase of the plug.
Armando



Responder