Hello how are you? recently a client (I am a refrigeration technician) calls me to his house to do maintenance on his minisplits equipment, when I finish I leave the house and I see a dishwasher outside, I was ready to say, I ask him what happened to him and I He replies that they could not get a replacement, something like retention said. but good ... nothing more. I picked it up and took it to the workshop, I removed the lid and the side plates, I put it to work for my surprise it worked. but I have doubts about how I should go because I don't repair dishwashers, I don't even know how it should work. the device in question is model 2001 brand whirlpool apd 2554 whm. Then I tell you what it does, load water, the pump starts to work and the mills apparently go water in the transparent hoses that feeds the mills in the center and above. It depends on the job selection, heats the water more or less, removes the water, advances the cycle and ends. I would like if someone knows tricks of this device that is normal to control to know if it works. And if so, why would this guy have ruled it out? I put photos to see the model. https://cdn.yoreparo.com/uploads/imagen_post/0002/16/3b54f2248b92c69fa2834fcd68e2168jdddddgdgdgdgdgdgdgdgdgdgdgdpdgdgdgdpdgdgdgdgpicture.com/uploads/imagen_post/0002/16/d1e9cde6de15d48601f0f34ae147e9cef48d71f4.jpeg" alt="" />