Galego

679

hace 6 años

Check the pressure switch, it is probably clogged with grease ... you can try to pour some hot water inside by disassembling the filter before and pumping with a plumber plunger ... you should hear the click of the pressure switch ... . unplug it from the power, if not when you pump it will discharge the water ... greetings

elcacha

27

hace 6 años

Well I tell you that I have it disassembled and I can't find the pressure switch, it has a tank on one side where the water comes from the declassifier but the pressure switch I don't see it

elcacha

27

hace 6 años

Well I found the pressure switch I cleaned it had a lot of dirt but still doing the same problem, it loads water and stops, the start light now flashes 7 times .... the rest is all tested and is doing well

Galego

679

hace 6 años

Check the flow meter ... that the reed switch (glass ampoule) works properly ...

elcacha

27

hace 6 años

I have on the side a large flat tank where the water enters but there is no flow meter there, may it be in the tank where the filter is ?.