⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Dishwasher

Failure dishwasher Whirpool WLR12A error 004

getcheto
hace 6 años
hace 6 años
Hello boys. first of all I'm not a technician, but I've already fixed it three times with the help of you ... let's say I'm good at it, but he clarified it to help me without difficult technicalities, and giving me the most basic information to understand what is what to do. In this way, a few months ago, change the engine pump set, with your help. This time, it marks Error 004. START GOOD, wearing, start to wash, there is water in the cabinet, all right. Suddenly ... I mark this error, and I do not know where to start. He listened to his comments. FROM ALREADY THANK YOU VERY MUCH!!!!!
getcheto
hace 6 años

Lusangor Friend .... I do not know how to respond to your comment. It does not let me.
Disarm the washing machine, and I do not find anything unusual .....
Query .... next to the compartment where the salt goes, there is a kind of filter .... it looks like thick yellowish salt ... is that normal?

Responder
lusangor
lusangor
56.366
hace 6 años
hace 6 años
Hi. Hello, in the manual says it is a spill error, tilt back the dishwasher and see if water comes out of the floor, if so, let it finish and check if it is already washed.
getcheto
hace 6 años
hace 6 años
Hi. forgive the delay .... I did what you told me. I tilt it and water came out. I thought that there was the solution ... but n ... I set a 45-minute quick wash program ..... with about 18 minutes remaining, I pulled the error again. water comes out, warms it, washes, consumes the soap in the compartment ... but it does not manage to finish. I taper it back about 45 degrees ... I do not know if it will be necessary to put it to bed. I await your comments, and thanks for the help
lusangor
lusangor
56.366
hace 6 años

Okay, what you have is a loss of water, if you tilt it again, water will come out again and then it will wash until the anti-overflow detects the loss. You have to dismantle it and locate that loss.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis