Philips 14PT4131 / 77R, does not turn on the tube !!!
I'm going to check welds in that friend zone but I comment that almost all the board has been solved and if the flyback leg 9 would have to leave the 160v and the leg 5 the 6.5v but n is feeding xq the tube is energized but n march
hello friend look I just changed layers to solve the serca part of the vertical and now I have 159v but I do not turn on the filament and a little while and protect me also n voltages arrive to BD136 to Bd135 arrives 45v
neg2013 ... place the IS an7522N again apparently, remove diode in4148 and puce a new one the problem started when cmabie a 2.7v zener cmd soldered it well but once I turned it on I did not light the tube just that diode brought and passed x a 6.5v capacitor that comes from the filament part
The Lynx. Hello friend if it is 2.7 vol the zener and if I have the diadrama I have replaced it again that zener ace a ground bridge of pin 9 of the audio vol of the vol in that location there were those 6.5 vol I do not have them all the voltages fell 12.45vol- 10vol 8vol- 7vol 95,2vol 93vol 160vol 159vol and so what surprises me that in the bd135 arrives more than 45v and in the bd136 only 8o 10 vol and after a while the tv cuts
¡Aprende a reparar con estos cursos YoReparo!
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
