willyboy1420

1.072

hace 5 años

Solve the socket plate .... and if you can upload an image with the fault ...

Alemross

347

hace 5 años

Hi Willy, I already solved the entire socket plate point by point. And I'm still in it. I will try to upload a photo since the problem with the cell phone is not well appreciated

willyboy1420

1.072

hace 5 años

Do you have any ptc of a chassis for you to change, sometimes the ptc bad stains the color image

Alemross

347

hace 5 años

The stain is only orange, and the ptc is in good condition is new. The stain is only in the outline of the figures

willyboy1420

1.072

hace 5 años

Chassis number

willyboy1420

1.072

hace 5 años

See how the video filters go ... and measure voltage on the 180V flyback pin ...
Use transistors or an ICVideo on the socket plate .....
If you use transistors measure voltage in B and C of each, they should measure the same (high voltage) ...
If you use ICVideo (ADD) try another ...

victor flores martinez

6.834

hace 5 años

Hi
an image would help a lot
may be convergence failure

Alemross

347

hace 5 años

Sorry that there is not uploaded an image but I took several photos and you do not get to appreciate the problem anyway, I commented that it was like a soft orange trail but annoying to the contour of the images. Check all the filters and transistors and as everything was fine I solved the tube plate again and it was perfect. I clarify that I had already reviewed before that had ruled out a possible false contact. Thank you

Alemross

347

hace 5 años

Friend Willy, I'm going to give you the solution, thank you very much