21 inch daewoo tv model DTA-21A2 SET
Rojas fixed if this is the diagram:
https://www.mediafire.com/file/ttqnj1esbo4vuvv/daewoo_dtq-21a24n_dtq-21a35r_chassis_cx-a21fb.pdf
excuse me friend evelio but the plan does not tell me anything since it does not correspond to the television described with the characteristics and the problem that it presents is that it turns on the sensor of the remote control and turns off immediately indicate please me thank you.
companion. If we already have a good image, but no audio, then: 1.- remove the audio ci and check the voltages. With an audio tracker you locate which audio input pin and there you place your tracker. says that integrated is the audio to look for it and tell you what power it should have. Comment how much you have of bmas. 2.- if the speakers are 8 ohms, you remove the speaker and place a resistance of 8 ohms 10w. This allows you to check the voltjes. If possible, you can feed the audio from an external source with less voltage. greetings everyone. Felipe ascencio
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
