Yoke was solved in court.
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
TVs
Daewoo dtq-2056fs chassis cn-52n, does not turn on.
124
hace 5 años
hace 5 años
daewoo model dtq-2056fs with chassis cn-52n (does not turn on) check the horizontal and mark biem with the tester did not cross.
d1878, c801 160por 33uf, c999 4.7kv 472, c907 were replaced.
but it still does not turn on, I weld the horizontal again what I notice is when giving power in + b there is a 136v peak in that
instantly a noise is heard by the blyback and the source is turned off ..
diagram: chassis cn-52n
https://adjuntos.yoreparo.com/imagen_post/0004/25/30b3338410e8945855ee4a8fc596786cc433bd67.png" alt="" />
Yoke was solved in court.
Yoke was solved in court.
30.814
hace 5 años
hace 5 años
Hello Friend. If the yoke is short, replace it with another one of the same number or if you can repair it, you have to disassemble all the winding there where the short is either of the horizontal bovines or the vertical vobinas. but if you find another yoke equal to that it is better but then you solve the fault. Cheers
30.814
hace 5 años
friend. first the measurement of the horizontal bovines and the vertical vobinas that measure equal to that yoke that you have bad and the most practical that is of the same number as the one that you have repaired
30.814
hace 5 años
friend. because if the one you find measures well in both bovines it may not fit well in the neck of the tube so it is better according to the number of the yoke
¡Aprende a reparar con estos cursos YoReparo!
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
Curso Tecnología Inverter - Fabricación de probadores y herramientas
Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad