nicomena2015

9.501

hace 5 años

hello friend: put model and tv chassis ... indicate position number on the component board where you have the 360v ... ok ..

neg2013

14.048

hace 5 años

Good afternoon, if I enter the serial called "model" it results in the search with Google Chrome, which corresponds to the K15A chassis Verify that data please, so far it can not be helped, the data provided makes no sense ...

sanfalla

1.821

hace 5 años

friend that's the card part number ok no problem .....

Héctor Vasquez

4

hace 5 años

It is the CT-5066vbc model I had inflated the fat filter I changed it and nothing changed the smr 40000 regulator and it turned on the stanbay but I give it power and nothing and I measure in the fat filter and it gives me 360 v

sanfalla

1.821

hace 5 años

there should not be that high voltage you will not have a problem with the multimeter ..... I really do not understand that over oscillation seems nominal inductance

nicomena2015

9.501

hace 5 años

colleague: if you refer to the fat filter to the main filter in the primary of the source .... there can never be 360v ... if you have 110vac in the electrical network in the filter (fat) you should have (approx) 165vdc ... If you have 220VAC in the electrical network, you should have 300VDC in the fat filter ... "check your voltmeter" or you are measuring DCV voltage on the ACV scales ... the voltage on the fat filter as you call it is measured by taking as mass the negative of the main filter or (fat) .. on the DCV x 1000v scale ... make the measurements again and comment on them ... ok ..

Héctor Vasquez

4

hace 5 años

Dude I measured and if he gave me that way the main filter measures 160v and the Bay light is not on