⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
TVs

How to turn on Tonomac TV Source

skatapla
hace 5 años
hace 5 años
Hello friends, could you tell me how to make the bridge to turn on this fountain, then I leave photos. thank you! https://ibb.co/fTZNNR https://ibb.co/ktCjK6
Victor E
Victor E
65.783
hace 5 años

Does the source have st-by voltage, how much?

Responder
skatapla
hace 5 años

Hi Victo, thank you very much for your time, with the source outside the TV gives me the following measurements, if you could tell me where I should measure stand by, I would appreciate it very much!
https://ibb.co/dS6qu6

Responder
Victor E
Victor E
65.783
hace 5 años

connect the source and in the tab that goes to the main board there should be only one voltage, that is the stand-by.es.to do this without the main connected.

Responder
skatapla
hace 5 años

Victor, I find no tension in any of the connector pins you mention, how do I continue? Thank you

Responder
Victor E
Victor E
65.783
hace 5 años

the source does not work, the stand-by part does not oscillate if there is no tension.

Responder
skatapla
hace 5 años

Victor thank you very much for your help, following your advice I found a Schottky diode model STPS10LCD100C in poor condition, well look in my city but I did not find it, the closest thing was a 20100CT, I soldered it in replacement and the TV started perfectly, my Question is if it is suitable to leave it definitely, thank you very much greetings!

Responder
Victor E
Victor E
65.783
hace 5 años

goes like, greetings

Responder
Victor E
Victor E
65.783
hace 5 años
hace 5 años
[b] Yes, apparently it is of higher amperage, so you can leave it. Give it a better response and close. PS: comments are still open. [/B]
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis