⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
TVs

Tv Samsung UH32EH4003G vertical and horizontal lines without plot

luis mardones arellano
hace 5 años
hace 5 años
The TV turns on check the flex clean its connectors and not removed the tecom
TobíasTv
TobíasTv
13.721
hace 5 años
hace 5 años
Hi Luis, welcome :), I leave a diagnostic video of t-con, see if it fits your case If you answer I give you my Like of Luck for what solutions but I hope yours;) I greet you, Tobias If you ask a question in the forum, always answer it, the colleagues who answer you spend your time and knowledge with the will to help you, if you are grateful, choose the best answer and give a Like to those who participated. Thank you for collaborating in the forum and Success with your repair
luis mardones arellano
hace 5 años

Hello, thank you for your guidance, the team does not have audio and video, it illuminates the screen when changing source, the screen is whitened and vertical orizontal lines appear that tend to defuminate. Do not select channel

Responder
TobíasTv
TobíasTv
13.721
hace 5 años

first notice that 12 volts reach the tcon, if so try this tip
-
I will indicate a practice, always very carefully and fiddle with the unplugged TV
try disconnecting one of the two flexes that go from the t-con to the display and test if you have an image in the middle of the screen, if this does not happen connect it (eye, well connected) and disconnect the other and try again, if you see image in the middle of the screen is the bad display, I can indicate a practice to solve it in the best case

Responder
luis mardones arellano
hace 5 años

Ok, I'll try it.

Responder
benito lamelis v
hace 5 años
hace 5 años
For Luis, or for those who take it, my solution: Here what is failing is, the Main or video card, this has happened to me twice and, this must be taken out by deduction or logic, if the T. CON fails , the sound and tuning is maintained and, to separate functions disconnect the LVDS; I hope to participate more often, greetings to all: Raúl.
luis mardones arellano
hace 5 años
hace 5 años
T-con failure
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis