⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

TVs

Philips LCD TV 42PFL3008D / 77

leop

hace 5 años

I need help with Philips brand LCD model 42PFL3008D / 77. When connected to the mains only turn on the light for two seconds, then it pays and does not turn on again. It has no sound at any time, does not obey the remote control or keypad. Check source plate (715G5792-P03-000-002M) review welds of elements that handle a lot of power. check fuses and voltages on output tab. Apparently everything is ok. I only notice that there is 5v on the on / off output during the two seconds that the LCD light comes on, then it goes to zero. From already thank you very much. Leonardo Torres Mechatronic Technician

Comentar

TobíasTv

13.721

hace 5 años

if you have a programmer the update file of the philips page you unzip it and it is a .bin you can record it in a virgin eeprom, if you have it I indicate you as



Responder



TobíasTv

13.721

hace 5 años



hace 5 años

Hello when you get tired of testing ... Put a new eeprom https://articulo.mercadolibre.com.ar/MLA-639101788-memoria-programada-philips-32pfl3008d-32pfl3018d-42pfl3008d-_JM luck and congratulations

Comentar

leop

hace 5 años

Thank you very much for your help. It was the solution to my problem !!!
I also thank all the colleagues who participated in my consultation.



Responder

TobíasTv

13.721

hace 5 años

I leave you my luck, see you next time



Responder

José Luis Carpi

1.684

hace 5 años

Hi Leop, on a Philips 32PFL3008D / 77 With the TV disconnected I jumped the center pin and the top of the back tab Serv.U and connected the TV at 220v, a couple of seconds, then I removed the bridge and it worked! Regards

Comentar