⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
TVs

Lower cell charger voltage from 54v to 3v lg

RICrichard
hace 5 años
hace 5 años
I WOULD LIKE TO KNOW HOW I CAN LOWER THE VOLTAGE TO A 5V TO 3V CELLULAR CHARGER, SO THAT IT IS CONNECTED TO THE REMOTE CONTROL OF THE TELEVISION AND THAT I AM OF VENEZUELA AND IT IS NOT POSSIBLE TO BUY BATTERIES BECAUSE THEY ARE TOO COST FOR THE PROBLEM THAT WE ARE PASSING , IF SOMEONE GUIDES ME I AM NEW IN THIS AND I WOULD LIKE YOUR SUPPORT FOR SOMEONE TO BE BY DRAWINGS OR GIVING INSTRUCTIONS OF HOW TO DO IT, I WOULD THANK IT ENOUGH.
felipe  antonio
hace 5 años

companion .. the contribution of maestro jose enrique is good. Just one comment, the zener is reversed. the cathode must go to the positive and the ground anode. greetings everyone. Felipe ascencio

Responder
J. E. T
J. E. T
810
hace 5 años

Felipe Antonio I was right I was wrong in diode goes backwards that happens to do things to the races xd

Responder
J. E. T
J. E. T
810
hace 5 años
hace 5 años
It is very easy with a 3.3 or 3 volt zener diode or a resistance of at least 1khom I attached a diagram "corrected" I hope and it serves you can solder the diode directly to the springs the negative directly and the resistance to the positive note: do not use a charger of more than 2 amps since the resistance to heat a 35mha (.35amp) of an old cell phone will be very hot, it will serve you well or maximum 1 amp to avoid taking risks salu2 Now if it's okay I do the diagram
RICrichard
hace 5 años

Jose Enrique thank you very much for that contribution friend, I live in Venezuela and this is very bad and all very expensive, already AAA triple batteries, they are through the clouds and difficult to get, and I have many cell phone chargers and I will use it with the specifications that You sent me

Responder
felipe  antonio
hace 5 años
hace 5 años
Master Jose Enrique. good morning. It is natural.- as you express it "the races". but the diagram fits him well. Regards. Felipe ascencio
RICrichard
hace 5 años
hace 5 años
Thanks felipe now the 1K resistance of 1/4 watt
felipe  antonio
hace 5 años

companion.- subject to what José Enrique Enrique thinks, it should be 1 watt., the more watts it does not affect him, greetings everyone, Felipe ascencio

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis