⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
TVs

Sharp 21V-R70MM TV with video and double image noise

Televisor SHARP 21V-R70MM

Televisor SHARP 21V-R70MM

francisco rodriguez caret
hace 5 años
hace 5 años
Sharp TV shows noise in the video with antenna or cable. With DVD it looks "normal" but with double image or ghost image. photo!
francisco rodriguez caret
hace 5 años

Voltage + B is 180 VDC. All voltages are OK.

Responder
cop2017
cop2017
225
hace 5 años

If it is a GA-4M chassis, use smd micro jungle marked IC1001. + 8 Vdc on pin 44, (100 uF / 16 V-c829), and on pin 12, (c807-330uF / 16V). From regulator IC801, switched. I suggest you check this voltage and change these filters; They feed the video process. In addition to what was mentioned by manolo karvalo.

Responder
cop2017
cop2017
225
hace 5 años

I correct: IC smd 801; IC regulator 8 V, IC601.

Responder
francisco rodriguez caret
hace 5 años

The solution was supplied by cop2017 and for a rebound of the keys of the PC I attributed it to manolo. There must be a way to correct this error! Regards cop2017. Even when the chassis is not the same, I replaced the 330MFd / 16VDC and 47MFd / 16VDC capacitors and the noise in the video was eliminated. Thank you!

Responder
manolo karvalo
hace 5 años
hace 5 años
Hello Friend. check the filters that are close to the flayabck and solve the flayabck pins and the socket of the socket the white color that is in the plaque of the trc .. and carefully resolved not to leave pins attached to the pins of the ic. Chroma already solved the choper pins and those of the ic. Vertical these if they are with cold welds and if there are bulging or inchado filters change them. luck and regards
cop2017
cop2017
225
hace 5 años
hace 5 años
If my comment was a solution, here you can rate it. Regards.
francisco rodriguez caret
hace 5 años
hace 5 años
Regards cop2017. Even when the chassis is not the same, I replaced the 330MFd / 16VDC and 47MFd / 16VDC capacitors and the noise in the video was eliminated. Thank you!

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis