mario256

53

hace 5 años

Ise both tests and the + B follow in 65v

Victor E

65.783

hace 5 años

What type of load or focus are you using, does the test do it without the horizontal output transistor? If you use a 60 or 75 watt incandescent bulb as a load, do you turn on something?

mario256

53

hace 5 años

I am using a lamp of 100w of vajo consumption the ise test without the horizontal output transistor and does not light anything

Victor E

65.783

hace 5 años

no friend, it does not serve the low consumption as a simulated load, you must use an incandescent or filament type to know if it is the source or something else that consumes you more. Less bad than in the scheme says the incandescent lamp

mario256

53

hace 5 años

Give tomorrow a try with an incandesente and comment

mario256

53

hace 5 años

Good day victor I bought an incandesente lamp and ise the two tests and it remains exactly the same as + B I have 56v

Victor E

65.783

hace 5 años

then repair the source

mario256

53

hace 5 años

Well now I'm going to check the str and the source layers

mario256

53

hace 5 años

Good morning, the problem was at the source I had the D616 EG01C with leakage replaced an IN4937 now the TV shines well and after a few seconds the screen starts to close in horizontal centering and turns off