Adrian Iron

11

hace 5 años

I can not know why probe vs with the control different inputs, such as Av1, Av2, etc. and nothing .... what I can not see image I do not know ..... I have it connected to a prepaid directv encoder in AV1 but nothing .... you will know how to tell me how I bridge the source to know about the LEDs ...?

EVELIO RIOS H

9.700

hace 5 años

Adrian but you comment that the TV turns on! or it will be only that the stanby led (red) turns on, if so, the fault is the main board.

Adrian Iron

11

hace 5 años

THE TV LIGHTS THE MOST WELL, THE LIGHT OF STAND BY PASSES FROM RED TO BLUE, THE SUBJECT IS THAT I DO NOT HAVE LIGHTING OR SOUND AND IMAGE ... THAT IS WHY I WANT TO BRIDGE THE SOURCE TO REMOVE THE DOUBTS OF THE LEDS ..... BUT I DON'T KNOW HOW TO DO IT IN THIS MODEL ...... I WANT SOMEONE TO TELL ME THE CONNECTIONS IF POSSIBLE .... TO GO DISCONTINUING ..... BEFORE BUYING A MAIN AND THAT IS NOT THE SUBJECT ... ..

EVELIO RIOS H

9.700

hace 5 años

Adrian that fault along with LW Lg models are due to overheating of the micro, the main must be changed.

Adrian Iron

11

hace 5 años

Evelio Rios H, I thought the same, but before I wanted to make sure well and I was hoping it wasn't that ... but as you well decide I will have to change the main..there is another .... I thank you very much for your help ... .
best regards....