⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

TVs

on tv I stopped watching cable channels

adso1966

200

hace 5 años

Hi, I have a golden-tube TV from one day to the next, they stopped watching the cable channels, only the air channels are seen, the remote control is not the original, can it have been deprogrammed? greetings to Adrian topdos

Comentar

neg2013

14.048

hace 5 años

Good night ... It may be that the TV is simply on AIR Channels, with the remote control there must be a key to put it in CATV .. In one of those if you mention which model it is you can tell it which control you are to that TV



Responder

dario-22

hace 5 años

Which company provides you with the cable channels (I understand that the analog signal is being removed, there will be no more)

Comentar



Jose Fernandezelectronico

933

hace 5 años



hace 5 años

If the TV has the key: SET-UP on the front or on the remote control do the following: 1 °) press SEP-UP key until the inscription appears on the screen: TV and then and before this encryption disappears, press: VOL + Must be passed to CATV. (TV cable) 2nd) press SEP-UP again until the display shows: SELF-PROGRAM and then press VOL + (before it disappears); begin to pass all the channels in transmission. DO NOT TOUCH ANYTHING until it stops. Ready.

Comentar

Jose Fernandezelectronico

933

hace 5 años

If the remote control does not have the SEU-UP key, press it on the front of the TV and you can do the vol + from the control. Always following the two steps indicated



Responder