⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
TVs
I have a TV brand admires model ATV1950
hace 5 años
hace 5 años
He turned on and ran out of signal and lost the audio by taking a little tap on the plate and bolvia averse and the volume came again he proceeded to rectify the welding pits on the part of the INTEGRATED as legs and I am fine now not celebrate laseñar but there are some CHANNELS THAT DO NOT TUNE CAN HELP ME
30.814
hace 5 años
hace 5 años
Hello Friend. for what you indicate. you have to solve all the crystallized welds of the plate from the choper pins through the ic.vertical and flayback pins and others that you see on the plate. after it looks good and if the channel tuning fault persists. you measure the tuner's pins and upload the results because it has to be 33volt. +5 volt and 4.7 in the agc. regards
hace 5 años
hace 5 años
solve the crystallized parts of the welds and seve well thanks for participating
hace 5 años
Conchale companions and after it was working well I started to thin the belt and glued the screwdriver into a component and gave a spark and turned off I put the leg now turns on but it has no sound or image is a small vertical shells that joke but I know that with your help you will be well again thank you very much, colleagues
hace 5 años
friends I thank you please help me again with your high expectations in this area thank you thank you for your answers
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad