⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
TVs

29 "LG color TV model 29FU3RS

deltronic
hace 6 años
hace 6 años
Greetings to all colleagues please if someone can support me with the fly back number of the 29-inch LG TV model 29FU3RS has the fly back short but the number is not seen and the horizontal output transistor is also short . What other elements do I have to check after changing the damaged items? Thank you for your help.
manolo karvalo
hace 6 años

Hello Friend. To try to look it up on the web you need to upload the chassis number of that tv.

Responder
manolo karvalo
hace 6 años

friend. check the polyester capacitors that are there near the tsh. and the ferrite volley that is not reheated

Responder
lookeador
lookeador
404
hace 6 años
hace 6 años
Transformer, FBT BSC29-N2464 - 125V 220V .... you could also check the bridge diode and surrounding areas to the bridge diode and flyback ... greetings
deltronic
hace 6 años

Greetings to comment on the LG 29FU3RS TV change the fly back without number for the 6174V-5003W, change the C406 183J to 2000V diodes 401 and 402 and the horizontal transistor C6090 is already on but now you hear excess high voltage and you reheat the horizontal transistor please any suggestions thank you

Responder
manolo karvalo
hace 6 años
hace 6 años
Hello Friend. I found that for the tv. lg. Model 29fu3rs found that the flayback it has is the 6174v-5003w, 6174v-5003g, 6174v-5003a. I hope this data served you. regards
deltronic
hace 6 años

If thanks if it matches the 6174v-5003W I already changed it the TV turned on a few seconds and then turned off, when checking it I found that the Short Horizontal Transistor was put back to change it; grace for any suggestions you can give me

Responder
deltronic
hace 6 años

Greetings to comment on the TV 29FU3RS that did not turn on; with the 6174V-5003W it is open too much, I had to check the previous fly back and it is good and I put it back with this the screen is not filled and on the sides I have undulations and excessive voltage in vertical +/- 17 that should be + / -14, where should I have 200V I have 234 the Horizontal transistor is heated and in choper transformer where it says that there should be 35 I have 42v, B + 126v and what voltage should the STR-X6556 deliver? Do I have doubts about this integrated? Thank you for your help and support.

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis