Carlos Quiroga

1.400

hace 6 años

Hi, you have no control because they broke it or because you simply don't have it. Because the control must be, it is more contained in the diagram.

ratonelect63

5.308

hace 6 años

you tried changing flayback

miguel 86

2.160

hace 6 años

Good, comment if you have any other modification, you have connected the cable that comes out fly back to the tube plate, lest the fly back pot is broken, and they put an alternative circuit that is to produce sgreen voltage

erickmj

75

hace 6 años

it is not remote control is the bototon of the flayback secree bone is this intense luminusity

miguel 86

2.160

hace 6 años

Hello, no colleague I speak of remote control, all the comment they make is about the sgreen regulator that does not have

erickmj

75

hace 6 años

if sorry excuse me

erickmj

75

hace 6 años

ready the problem was a dry capacitor of 22uf / 1000v was dry the detail that remained was that it looks with spots on the side of the screen

erickmj

75

hace 6 años

ready the problem was a dry capacitor of 22uf / 1000v was dry the detail that remained was that it looks with spots on the side of the screen

erickmj

75

hace 6 años

ready the problem was a dry capacitor of 22uf / 1000v was dry the detail that remained was that it looks with spots on the side of the screen

erickmj

75

hace 6 años

well modifications does not have

miguel 86

2.160

hace 6 años

Well if it has no modification, you have to change fly back, there is no other, or make circuit that happened colleague and tests

erickmj

75

hace 6 años

boi to look for another flayback and then comment a question where is the r411 warm up too much

erickmj

75

hace 6 años

boi to look for another flayback and then comment a question where is the r411 warm up too much

miguel 86

2.160

hace 6 años

The resistance comes out of the 180v of the fly back, verify diode and electrolytic that works with resistance, not what number did you say you had a bridge

erickmj

75

hace 6 años

I already solved it was a dry capacitor of 22uf / 1000v the only detail it has is are colored spots on the side of the screen

miguel 86

2.160

hace 6 años

And the regulator of the sgreen that happened like this without it, had another modification or what?

erickmj

75

hace 6 años

The white screen problem was not the same. It was the bad capacitor. I thank everyone for shaking hands.

erickmj

75

hace 6 años

The white screen problem was not the same. It was the bad capacitor. I thank everyone for shaking hands.

miguel 86

2.160

hace 6 años

Look there in the blue part, there you pass part of the fly back