⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
TVs

I have a LG brand TV model no CP-20FG62

Jeesus Caicedo
hace 6 años
hace 6 años
first of all good night all the followers of yoreparo the TV does not turn on only the leec of the establishment and was guided by some of his advice to take off some pins of the components of the type of protection rods and how there were no components described by the panel of And I repair such as the diode, the reluctance and another diode, because it is not only detach the capacitor c309 and after that on cendio and it remained lit for a few seconds but at the immediate caci it felt like a burst and came out of the icvertical now I want to know please consider that operation I have to thank you for your collaboration
manolo karvalo
hace 6 años

Hello Friend. because you took off that c309 filter and you need to upload the tv chassis number.

Responder
Jeesus Caicedo
hace 6 años

I thought that this is how I would see the failure of the protection shutdown and that was how the TV went on but it turned out that I still weighed the vertical ic and again turned off

Responder
Javier Chavez C
hace 6 años
hace 6 años
Chassis DIAGRAM: MC-83C HERE https://drive.google.com/file/d/0Bw6x5USOTsk-eDllSnloRWxkQ0E/view?usp=drive_web Check components related to the vertical IC and surroundings, in addition to the source that feeds this stage
Jeesus Caicedo
hace 6 años

thanks javier for your participation but I still can't buy the vertical ic here it is expensive but I am in that I warn you thank you friend

Responder
Jeesus Caicedo
hace 6 años

javier monte the ic vertica and turned on but now seve blue and has no audio and has a leak in the flaybat I think it is on the inside that you recommend me to thank

Responder
Javier Chavez C
hace 6 años

The first thing is to change the FBT.
What do you mean by blue. What does the image look like with a predominance of blue or what does the plot look like in Blue like when it is in A / V?

Responder
Jeesus Caicedo
hace 6 años

look javier the flaybat and cure it with cilicon and not open achipar apparently it was well had a fissure on the plastic part of the body of the flaybat I put cilicom and well you can see the images but seven all the blue images and everything that can be that fail what is causing this please give me a hand

Responder
Javier Chavez C
hace 6 años

If I could upload a photo that shows the problem. Thank you

Responder
manolo karvalo
hace 6 años
hace 6 años
Hello Friend. If the fault is in the vertical stage you have to do the following. replace the c309 filter again. and change to new all filters that are related to the ic. vertical and change although the diode that feeds the ic is good. vert. if the horizontal line comes out you change the ic. vertical because ic smoke came out. It is bad and you check the resistors that feed the diode .--- and if the flayback is leaking, change it before the ic is shortened again. vertical or other element, just mention the flayback number to ber if it has replacement. regards
Jeesus Caicedo
hace 6 años

Okay, I hope I’m vertical and the filters and when I mount them, I’m telling you, thank you friend Manolo

Responder
manolo karvalo
hace 6 años

friend. Remember that you have to change the diode that feeds the ic. vertical --- and what number is that ic. vertical

Responder
Jeesus Caicedo
hace 6 años

la7833

Responder
Jeesus Caicedo
hace 6 años

it's la7833

Responder
Jeesus Caicedo
hace 6 años

look at manolooblems that
I changed the vertical ic and I now have more problems than severe blue and the flaybat you recommend me leaks

Responder
manolo karvalo
hace 6 años

friend. If the flayback is leaking in the body part you have to change it because if you try to put sealant the leakage will burst on the other hand but if the leak is in the cable that is connected to the screen I think it can be repaired

Responder
Jeesus Caicedo
hace 6 años

Maenolo solders it with silicon and if it has the leak through the body but I stop giving the spark and apparently not severe or it is smelled that it is leaking and left it preached for a long time and not sharpened just that seve blue everything

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis